Tyres Dunedin – Tyres are one of the most important and most overlooked parts on a modern day vehicle.
They are the main contact your vehicle has with the road. Many people fail to realise that tyres require maintenance on a regular basis for them to continue operating at their peak.
Listed here are some top tips to keep your tyres in a good, safe operating condition:
Keeping your tyres and the correct pressure is a major part in prolonging tyre life and performance. People often forget this. Or only check when the vehicle is serviced.
Keeping your tyres inflated properly not only helps provide maximum contact with the road, but also increases fuel economy and reduces road noise.
All vehicles have a tyre placard fitted. It could be on the drivers inside door jamb, or located on the inside of the fuel flap on some European models. This will have the recommended tyre pressures for both normal driving. Or driving with a full passenger load, and high speed driving.
Tyre tread is designed to disperse water and improve grip on the road in treacherous conditions.
The design of the tread pattern (also known as ‘blocks’) allows the tyres to grip the road, improving safety and handling – even in adverse conditions.
Tyres need to be checked regularly to ensure there is sufficient tread depth left, and to make sure there are no punctures or visible damage to the tyre.
Most tyres have small triangles on the sidewall, that indicate where the tread wear markers are located.
The minimum legal limit for tread depth is 1.5mm. If the tread on the tyre is the same level as the wear indicator, it is time to replace your tyres.
Finding your tyre size
Locating the size description on your tyres is a simple process. On the sidewall of your tyres (The side facing outwards – usually will have the brand of the tyre) there will be a sequence of numbers, which will give you the tyre size on your vehicle.
An example would read: 205/65R16 92H. This is the number you will be asked for, when quoting tyres.
205 – the width of the tyre (in millimetres)
65 – this is the sidewall height, as a percentage of the width (in millimetres)
16 – the size of the rim for the tyre (in inches)
92 – the load rating of the tyre. The heavier your vehicle, the higher the load rating.
H – the speed rating of the tyre. The higher the performance of the vehicle will determine the speed rating required.
Wheel Alignment and tyre rotation
The alignment of the vehicle’s wheels can dramatically affect the way the vehicle handles, stops and how quickly the tyres wear out.
Having the alignment checked on a laser wheel alignment machine will make sure all the suspension and steering components are in good condition, and will increase the life of your tyres.
Have your tyres rotated and the balance checked at regular intervals. It will increase the life of the tyres. It allows the tyres on both the front and the rear of the car to wear evenly. It also prevent any wheel vibration at higher speeds.
Call us – or drive in today to have an expert take a look and give you advice on your vehicle’s tyres.